多伦多大学代写:机械工业施工方法

今天为大家整理一篇优秀的essay范文-多伦多大学代写:机械工业施工方法。本文讲述的是在一般机械工业中使用的施工方法是基于预期的优化形式的高度可变的,这些再一次不仅与被考虑的拓扑有关,而且与一般的建筑业非常相关。首先,建筑方法将关注于建筑行业不断增长的成本。不断增长的成本必须通过最大化场地生产力和能够减少总体浪费的方法加以控制。建筑工地技术的发展在这里是有用的。在建筑和一般机械的发展部门,采用的一些不同形式如下。

多伦多大学代写:机械工业施工方法

在一般机械和建筑行业,不同的施工方法是可能的。设计/投标/建造是最简单的方法,没有足够的考虑将不得不分配到细节。在设计建造施工模式中,业主将外包给单个组织实体,由其提供服务设计和最终施工。合同实体可以是一个独立的设计团队和一个独立的施工和质量保证团队,也可以是一个单一的实体。设计/投标/交付是最传统的方法之一。业主或业主首先聘请所需的建筑师或工程师,根据技术文件的要求为建筑创作提供设计服务。在这一点上通常有一个投标过程,投标过程的目的只是为了确保被选中的投标人能够在指定的成本措施范围内完成合同规定的工作。在这一点上,总承包商也将能够提供将在这里工作的分包商的数字。

多伦多大学代写:机械工业施工方法

设计/投标/建造项目交付方法被认为是最基本的方法,在其他方法之上可以使用。这种方法本身有以下优点。首先,它对工作和生产施加了一种易于使用的组织方法。它在行业中已经建立了非常完善的法律先例,解决了行业中对协议的很多需求,所有者也能够做一套自适应的检查和评估,以检查质量。这种方法的一些变体是业主可以单独与施工经理签订合同。在这方面,经理的参与要积极得多,因为不涉及投标过程,而且大多数方法和规则对双方来说都是非常透明的(Allen & Iano, 2011)。另一种方法是所谓的交钥匙式施工。在交钥匙施工方法中,业主将与提供施工或制造服务的单一实体签订合同,此外还将能够处理财务问题。这种形式的建筑实体将混合许多现有的传统角色。这也是一个可能的立场,当不同的组织方案可能需要添加到施工方法。分阶段施工方法也被称为快速轨道式施工,其目的是提高施工时间。时间的减少将导致相关成本的减少。这种形式的建筑将通常工作的一些形式重叠的设计阶段。分阶段施工方法通常容易出现很多设计错误,尽管时间改进对成本有积极影响,但从长期来看,施工方法有增加修正成本的记录(Allen & Iano, 2011)。

多伦多大学代写:机械工业施工方法

The construction methods used in the general machinery industry is highly variable based on the forms of optimization that is expected and these once again are not only connected with the topology being considered but also are very relevant to the construction industry in general. Primarily, construction methods would focus on growing costs in the building industry. Growing costs have to be controlled by methods that maximize site productivity and are able to reduce the overall wastage. Development of building site technologies is useful here. In the development sector for buildings and general machinery, some of the different forms adopted are as follows.

多伦多大学代写:机械工业施工方法

Different construction build methodologies are possible in the general machinery and construction industry. The design/bid/build is the simplest of the method where not enough consideration would have to be assigned to specifics. In the design build construction mode, the owner will contract out to a single organizational entity who will provide design of the services and the end construction. The contracted entity could be a separate design team and a separate construction and quality assurance team or it could be one single entity, too. The design/bid/delivery is one of the most conventional methods. The owner or the client hence firstly hires the architect or the engineer needed who will then perform design services as required for building creation as per the technical documents. There is usually a bidding process involved at this point, the purpose of the bidding process is simply to ensure that the bidder who is selected for the process would be able to finish the contracted work within the nominated cost measures and more. The general contractor at this point would also be able to present the numbers on the sub-contractors who would work here.

多伦多大学代写:机械工业施工方法

相关的论文代写的话题